Low Frequency Pure Sine Wave Inverter

Low frequency pure sine wave combined inverter&A/C charger EP3000 Series 8 -12kw; Quiet,high efficiency operation front panel LED+LCD indicators and adjustable switch selectors selectable settings for flooded lead acid,Gel,or absorbed glass mat(AGM) batteries. Mainly for home and office applicances such as TV,refreigerator,fans lights and computers ETC.

Features:

• Rated power 8KW to 12KW
• Pure sine wave output
• Max 100A automatic 3-stage battery charger
• Charger current is Adjustable (0-100%)
• Built-in pure copper UI transformer
• Automatically send signal to start generator
• DC start & automatic self-diagnostic function
• Supporting USB/RS485 communicaion and BTS & AGS port
• Battery/AC priority

Two Colors Option:

Red

Silver

Specifications:

MODEL	EP30-8KW	EP30-10KW	EP30-12KW
Default Battery System Voltage	48VDC	48VDC	48VDC
INVERTER OUTPUT
Continuous output power	8.0KW	10.0KW	12.0KW
Surge rating (20ms)	24.0KW	30.0KW	36.0KW
Capable Of Starting Electric Motor	4HP	5HP	6HP
Output waveform	Pure sine wave/ same as input (bypass mode)
Inverter Efficiency(Peak)	>88%
Line mode efficiency	>95%
Power factor	1.0
Nominal output voltage RMS	220V/230V/240VAC(+/-10% RMS)
Output frequency	50Hz/60Hz +/-0.3 Hz
Short circuit protection	Yes (1sec after fault)
Typical transfer time	10ms(max)
AC INPUT
Voltage	230VAC
Selectable Voltage Range	155~272VAC(For Personal Computers)
Frequency Range	50HZ/60HZ (Auto sensing)
BATTERY
Minimum start voltage	20.0VDC/21.0VDC for24VDC mode (40.0VDC/42.0VDC for 48VDC mode)
Low battery alarm	21.0VDC+/-0.3V for 24VDC mode (42.0VDC+/-0.6V for 48VDC mode)
Low battery Cutoff	20.0VDC+/-0.3V for 24VDC mode (40.0VDC+/-0.6V for 48VDC mode)
High voltage alarm	32.0VDC+/-0.3V for 24VDC mode (64.0VDC+/-0.6V for 48VDC mode)
High battery voltage recover	31.0VDC+/-0.3V for 24VDC mode (62.0VDC+/-0.6V for 48VDC mode)
Idle consumption-search mode	<35W when power saver on
CHARGER
Output voltage	Depends on battery type
Charger AC input breaker rating	40A	50A	63A
Max charge power rate	1/3 Rating power
Overcharge protection S.D.	62.8VDC
Maximum Charge Current	70A	80A	100A
BTS
Temperature rate @25°C	4mv charging voltage descent, per 1°C rise
BYPASS & PROTECTION
Input voltage waveform	Sine wave (grid or generator)
Nominal voltage	220V/230V/240VAC
Max input AC voltage	300VAC for 230VAC HV mode
Nominal input frequency	50Hz or 60Hz
Overload protection (SMPS load)	Circuit breaker
Output short circuit protection	Circuit breaker
Bypass breaker rating	80A
Max bypass current	80Amp
MECHANICAL SPECIFICATIONS
Mounting	Wall mount
Inverter dimensions (W*H*D)	670*410*215mm
Inverter weight (solar chg) KG	67.5	74	74
Shipping dimensions(W*H*D)	802*533*429.5mm
Shipping weight (solar chg) KG	87	93.5	93.5
OTHER
Operation Temperature Range	0°C to 40°C
Storage Temperature	-15°C to 60°C
Audible Noise	60dB MAX
Display	LED+LCD
Loading(20GP/40GP/40HQ)	200pcs / 400pcs / 500pcs

*Products specifications are subject to change without further notice