60MHz Counter FG-32

FG 32 (6 Functions, 6 Ranges with counter)

·         Six waveform functions - Sine, Triangle, Square, Ramp +/- Pulse.

·         Frequency Range 0.5Hz ~ 3MHz

·         5 digit auto range counter LED display

·         Internal/External counter function.

·         Linear/Log sweep. Sweep rate 10mS ~ 5S.

·         External counter trigger level control.

·         VCF input 0 ~ +/- 10V

·         Voltage control frequency to  1000

·         Amplitude: 20V p-p (open); 10V p-p (50 Ohm load).

Specifications:
Main Output Specification:
Frequency Range : 0.5Hz to 3MHz in 6 ranges.
Waveform: 6 waveform (Sins, Square, Triangle, Ramp, + Pulse, - Pulse)
Amplitude 20V p-p/ Open, 10V p-p/ 50 Ohm Load
Attenuation : 0 dB, -20 dB (+/- 2%)
Output Impedance: 50 Ohm (+/- 2%)
DC Offset : +/- 10V with Pull ADJ Switch
Freq. Accuracy : Counter Accuracy
Distortion: < 1%, 1Hz to 100K Hz
Rise/Fall Time , 60 ns
V.C.F Input : 0 to +/- 10V Control frequency to 1000:1
SYNC OUTPUT
Rise Time : < 40 ns
Level: > 3V p-p (open)
Waveform: Square, Pulse
SWEEP MODE: Linear/ Log Sweep
Width :> 100:1 continuously variable
Rate: From 10mS to 5S continuously variable
Sweep Output: 10V p-p (open)
Output Impedance 1K Ohm +/- 2%
60MHz COUNTER
Display : 5 Digital 0.36 Red LED Display with Auto range
Gate Time: Auto Select (0.25S ~ 10S)
MODE: INT function Generator /EXT Counter
Attenuation : 0 dB, -26 dB ( 20)
Accuracy: +/- Time base Accuracy +/- 1count
Time Base : 20MHz +/- 10 PPM (23+/- 5 ‘C)
Frequency Range: 0.2 Hz ~ 60MHz
Sensitivity: 25mV rms at 1MHz
Max Input 250V rms

General Specification:
Power Source: AC 115/ 230V +/- 10% , 50/60Hz, 25 Watts
Dimension: 275 (W) x 90 (H) x 300 (D) mm
Net Weight : 2.5 kgs
Certificate: CE ULc TUV  GS IEC 1010  EN 61010

Ordering Information:
FG 32 - 3 MHz Function Generator with Counter