CM-30T Automatic Screw Feeder adopt ergonomic design of screwdriver set. The operator only need to simply trigger the lever of driver and the bit will push downward and fasten screw automatically.

        CM-30T reduces the downward press stroke of operator to enhance the productivity and reduce fatigue . Meanwhile, the jaw will not press the surface of work-piece hardly so that it could also protect the coating of products.
For automation purpose, SEALS automatic screw feeder also could be integrated into automation machine such as XY Table, SCARA robot, 6 axis ROBOT and any customized auto assembly machine, etc. And, its automation version also can provide relevant signals and receive control signal for communicate with major control system.

Features
1. The lever-activating design shall meet the ergonomics and laborsaving requirements.
2. Simply press the lever and the Screwdriver will complete the screw fastening automatically.
3. Automatic feeding to completely save the screw picking and moving action.
4. Applicable for 2.5mm ~ 6.0mm screws.
5. It provides faster operating speed up to 20 ~ 30 screws per minute.
6. The torque-controlled screwdriver is used to improve the fastening quality for the customer.
7. It uses Japan-made electric / pneumatic screwdrivers.
8. Fiber Optic control intellectual-type feeding, saving power while avoiding short supply.
9. The bit pushes the screw for fastening automatically. It prevents the jaw from contacting the surface of the work-piece; thus it will neither rub the product nor produce too much stress.
10. It is equipped with Spring Balancer to provide load free operation experience.
11. You may also select TR-350A, TR-350AE, TR-650A, TR-650AE, TA-300, TA-600, TM-6, THA and THB to provide a variety of accessory combination according to actual work need so as to achieve high-performance fastening quality.

Specification

• Voltage: 220V, Single Phase
• Air Pressure: 5.5 kg / cm² / 85PSI
• L / W / H: 35 / 25 / 38 cm
• Net Weight / Gross Weight: 23 kg / 31 kg
• Capacity: 30 pcs/min.
• Torque: Refer to screwdriver capacity
• Volume: M3 x 15 2000 pcs
• Driver Option : Sumake, Uryu, M&L (Air Screwdriver) or Sumake, Kilews Electric, Delvo (Electric Screwdriver)

Available Screw Chart

Listed below is the typical model of screw sizes that can be accepted for production. (Unit: mm)

(Note) Special specification screws not included in this table also can be used. For details, please contact a service person of this Company.

Pan Head Round Head		Flat Head Oval Head		Binding Head		Truss Head		Max. L Dimension (L)
Screw Head Dia. (D)	Min. H Dimension (H)	Screw Head Dia. (D)	Min. H Dimension (H)	Screw Head Dia. (D)	Min. H Dimension (H)	Screw Head Dia. (D)	Min. H Dimension (H)
		4.6	8	4.9	8	5.2	9	12
4.5	8	5.0	8	5.3	8	5.7	10	16
5.5	9	6.0	9	6.3	9	6.9	11	20
6.0	9	7.0	10	7.3	10	8.1	12	22
7.0	10	8.0	11	8.3	11	9.4	13	22
8.0	11	9.0	12	9.3	12	10.6	14	22
9.0	12	10.0	13	10.3	13	11.8	15	22