Scroll to Top
  • CM-30T-SERVO Automatic Screw Feeder with servo nut runner

        CM-30T-SERVO adopt high accuracy and low reaction force servo nut runner. It can provide the detailed information of every screw fastening.Designed for speed, stability and convenience. It could give warming currently when the fasten is out of setting pattern. And, it will come out a table list for your fastening process.

Meanwhile, you could also control the angle and speed of drive to reach the fastening quality requirement.
Most of all, you could organized a several fasten series as one job which cannot be done by electric screwdriver.

The jaw is customized by particular screw and working environment to provide a stable operation.
The lever-activating design shall meet the ergonomics and laborsaving requirements.
Simply press the lever and the Screwdriver will complete the screw fastening automatically.

With TA-300 torque reaction arm, it provides a steady vertical alignment for screw fastening. It enhances your product assembly quality and reduce the fatigue of operator.
Especially for the high torque shut-off screwdiver, it could keep the more stable performance of torque driver than hand-held.

Features

1. The lever-activating design shall meet the ergonomics and laborsaving requirements.
2. Simply press the lever and the Screwdriver will complete the screw fastening automatically.
3. Automatic feeding to completely save the screw picking and moving action.
4. Applicable for 2.5mm ~ 6.0mm screws.
5. It provides faster operating speed up to 20 ~ 30 screws per minute.
6. The torque-controlled screwdriver is used to improve the fastening quality for the customer.
7. It uses Japan-made electric / pneumatic screwdrivers.
8. Fiber Optic control intellectual-type feeding, saving power while avoiding short supply.
9. The bit pushes the screw for fastening automatically. It prevents the jaw from contacting the surface of the work-piece; thus it will neither rub the product nor produce too much stress.
10. It is equipped with Spring Balancer to provide load free operation experience.
11. You may also select TR-350A, TR-350AE, TR-650A, TR-650AE, TA-300, TA-600, TM-6, THA and THB to provide a variety of accessory combination according to actual work need so as to achieve high-performance fastening quality.

Specification

  • Voltage: 220V, Single Phase
  • Air Pressure: 5.5 kg / cm² / 85PSI
  • L / W / H: 35 / 25 / 38 cm
  • Net Weight / Gross Weight: 23 kg / 31 kg
  • Capacity: 30 pcs/min.
  • Torque: Refer to screwdriver capacity
  • Volume: M3 x 15 2000 pcs
  • Driver: Estic branded Nut Runnerr

Available Screw Chart

Listed below is the typical model of screw sizes that can be accepted for production. (Unit: mm)

(Note) Special specification screws not included in this table also can be used. For details, please contact a service person of this Company.

Pan Head Round HeadFlat Head Oval HeadBinding HeadTruss HeadMax. L Dimension (L)
Screw Head Dia. (D)Min. H Dimension (H)Screw Head Dia. (D)Min. H Dimension (H)Screw Head Dia. (D)Min. H Dimension (H)Screw Head Dia. (D)Min. H Dimension (H)
  4.684.985.2912
4.585.085.385.71016
5.596.096.396.91120
6.097.0107.3108.11222
7.0108.0118.3119.41322
8.0119.0129.31210.61422
9.01210.01310.31311.81522
10.513       

เขียนข้อคิดเห็น

หมายเหตุ: ไม่รองรับข้อความที่มีรูปแบบ เช่น HTML PHP Javascript
    แย่           ดี

CM-30T-SERVO Automatic Screw Feeder with servo nut runner

  • รหัส/รุ่น: CM-30T-SERVO
  • สถานะสินค้า: มีสินค้า
  • 0.00 บาท

  • ราคาไม่รวมภาษี: 0.00 บาท